How to flash Nokia 820 step by step with best dongle

1.first we need firmware

firmware already have in support

so don't let just download the latest package
i used
885AED32_RM825_3049.0000.1333.0016_RETAIL_eu_italy _244_16_265838_prd_signed.ffu

2.you need driver

NCCD_v7.1.182.0.7z
install it( it also can download from support)
3.normal 5130c usb cable
4.full charged battery
5.now we need to think phone is alive or dead now.
if phone alive just power on it and connect with usb cable .....................install driver

or if you have dead phone or only come nokia logo in red screen just follow the statement

• 1. Press and hold : "Volume Down" + "Power On"
• 2. Insert USB cable
• 3. When cable connected and you feel short vibra - release buttons

now you should select the firmware of nokia 820 rm-825
885AED32_RM825_3049.0000.1333.0016_RETAIL_eu_italy _244_16_265838_prd_signed.ffu

although navifirm download 3 file but you will use just 1 file.so don't worry about it
5.now click flash
recommended to you in dead phone you should trick (Recovery flashing )
otherwise leave it un trick
i success fully flashed 1 dead phone and recover it now.here my success story




hope my success story and my statement will help for who try to flash first time.

How To Install a custom Rom Karbonn A15

Here i am posting How To Install a custom Rom in Karbonn A15
Step By Step And guys its Alrdy Tested By Me
and say Thanks For Orignal Poster

How To Install a custom Rom

how to root this device

How To Install Cwm Recovry

Let"s Start

ROOT the Karbonn A15

1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS

2. Download Driver and Install it
you can download it from here pcdrivers.zip

3. download "Android Root Unlock" from Android Root Unlock | Free software downloads at SourceForge.net and extract it

and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list And its done
Install Cwm Recovery

1. Download the zip from here CWM5.0.2.8recovery - Download - 4shared
2. Extract the zip in a folder.
3. put ur phone in fastboot mode Use the key Vol Up + Pwr
4. Run CWM Recovery.bat and follow the simple steps

For Enter In cwm recovry Modepress and hold vol up and pwr key
it will show fastboot recovery in green display be patient dont leave the keys until it shows recovery Mode ( Cwm Recovry mode )

install Custom Rom

Now You Can Install Custom Rom In Ur Karbonn A15

Installation Instructions:
1 .Download Rom From here ICS_Tweaked_A15_SMD.zip
2. Put ur phone in recovry mode
3. select install zip from sd card and select ICS_Tweaked_A15_SMD.zip
4. Wipe Data/Factory Reset
5. Reboot

Done enjoy 

Dead boot repair done Samsung I9103 sucessfully with free tool Tested by me

Dead boot repair done Samsung I9103 sucessfully wit free tool Tested by me

This tool can fix it by USB cable only so no need to disassemble the phone and no need to use JTAG boxes even.

To use this tool you need to enter APX mode ( Volume Up key + Home Key ) then connect USB cable to Phone.
After you repair the dead phone it will be into Download Mode, So you can Flash it with Original Firmware.

update the driver manually goto device manager/APX drive right click nd show d path 2 update. driver is included n d zip file.

Then run the GT-I9103 windows batch file there type 1 and press enter nd it vil start d process.
after finish it vil go into odin download mode .use odin nd update using original stock firmware below given.

Download: Samsung I9103 Galaxy R Dead Phone Fix by USB

Firmware Download

Odin Download

Pit file Download

Sony Ericsson XPERIA Neo MT15I Update To 4.0.4 Done With Out Device Guide

Sony Ericsson XPERIA Neo MT15I Update To 4.0.4 Done

how to install the newest Android 4.0.4 for Sony Ericsson XPERIA Neo MT15i
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirror)
c) download also latest Android 4.0.4 (mirror) for Sony Ericsson XPERIA Neo MT15i
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding back button
g) after few minutes all is done and your phone gets the new firmware

Flashfile link here......

Xperia download firmware - Download

Flash tool download from here..

Xperia download firmware - Download - Other

HOW TO FLASH STOCK FIRMWARE (.FTF/ROM) ON YOUR XPERIA...... here is Tutorial

http://xperiadownload.cz/index.php/tutorial