All Mobile Hardware& Software Tested Solution : 11/30/13

[JXD S5300] ANDROID PLAYER Firmware Flash File Free Download

DOWNLOAD LINK: s5300_JB_13012013
NOTE: Tutorial is inside the rar file .. tested by me

Sony Ericsson X10i Charging Solution

Use original usb cable and charger for this model only.
Phone might not work when using not original charger.
Sony Ericsson X10i Charging ways Jumper Solution,Sony Ericsson X10i Charging line Solution,Sony Ericsson X10i Charging ways damage Solution,Sony Ericsson X10i Charging Solution ways repair,Sony Ericsson X10i Charging ic ways line jumper Solution

Sony Ericsson X10i Charging ways Jumper Solution,Sony Ericsson X10i Charging line Solution,Sony Ericsson X10i Charging ways damage Solution,Sony Ericsson X10i Charging Solution ways repair,Sony Ericsson X10i Charging ic ways line jumper Solution

ANOTHER GUIDE FOR UNLOCKING Samsung S3 and Samsung S4

I HAD TESTED THIS ON 4.1.2

BRO FIRST OF ALL ROOT YOUR FONE WITH BELOW GUIDE
- Download and extract Odin http://www.shabbypenguin.com/OUDstuf...din3-v3.04.zip
- Download and extract (just once) CF-Root Download CF-Root Download
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press volume up to continue, do so.
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Congrats you are rooted

now your fone is rooted now do below steps

DIAL ANY CODE WHICH WORKS FOR U
*#0808#
*#7284#
*#9090#

IN UART SELECT MODEM
AND IN QUALCOMM SETTINGS SELECT DM+MODEM+ADB

NOW OPEN Z3X SAMSUMG TOOL V16.1 OR LATOR
SELECT MODEL I747 NOTE FIRST TRY BY CLICKING UNLOCK ID UNLOCK DONE THEN FINE BUT IF IT SAYS FOLLOWING ERORR THEN DO THE BELOW WRITEN STEPS

Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.443072
Reading security... error access denied
Done with Samsung Tool v.16.1

Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Reading phone info...
Build: M8960A-AAAANAZM-1.0.443072
Reading security... error access denied
Done with Samsung Tool v.16.1
Done with Samsung Tool v.16.1
CLICK ON REPAIR
Press imei repair, choise repar EFS/Baseband, fill imei and choise imei (THIS OPERATION WILL WORK IN ADB MODE SO USB DEBUGGING SHOULD BE ON )
THEN FONE WILL REBOOT AND THEN REMOVE USB AND INSERT RJ45 (C3303k) CABLE
IT WILL DETECT FONE AND SAY REPAIR DONE

NOW YOUR Phone IS TOTALY UNLOCK

LOG OF UNLOCKING DONE BY ME
Selected model: I747
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SAMSUNG-SGH-I747
Android version: 4.1.2
Product code: Not Active
Phone version: I747UCDMG2
PDA version: I747UCDMG2
CSC version: I747ATTDMG2
IMEI: 0
Phone S/N: R21C75JA1LK
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Checking phone at COM11 OK
Repairing IMEI... OK
Reseting... OK
Repair done
Done with Samsung Tool v.16.1

Android Firmware Downloader [ADM] Version 2.0

Download Android Firmware without Searching Webs with

Android Download Manager [ADM] Version-2.0

How To Samsung S3 I9300&GALAXY NOTE 2(N7100)Boot Reapir

Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)
1)First Create Boot Card
2)Download teraterm-4.78 teraterm-4.78 3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)

Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper. Select Spt Serial Port (look the picture)

After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button

Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes

Info :

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_

After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture

open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.

any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMMC

THIS SOLUTION FROM SAMSUNG OFFICIAL TEAM

IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)

1)DOWNLOAD THIS FILE 2)EXTRACT ON DESKTOP 3)TAKE ONE MICRO SD CARD ALSO ONE CARD READER(SD MUST 2GB OR ABOVE) 4)INSERT THE CARD READER HOLDER THEN CONNECT USB PORT 5)OPEN THE Diskdump2.exe 6)SELECT GENERIC STORAGE DEVICE