How To Flash Android Mobile Use On Odin Downloader Without use Any Flasher box

Odin is a tool of Samsung which is generally used for flashing the official firmware on Samsung mobile Free Without Device Use . You can flash firmwares which are meant for your mobile but not released in your country (not available on kies). Even for flashing the custom recovery like Clockworkmod recovery or TWRP recovery you will need this tool to use easily.
Though the use of this tool is illegal since Samsung has not released this tool for the personal use, it will not cause any damage to your mobile as long as you know how to use it. You must turn off Windows firewall or antivirus software on computer to use Odin tool. Also you cannot use Odin if you have installed Kies on your computer.
Here is the list of different versions of Odin and their respective supported devices Supporterd Model Below us
How To Use This Odin ?How to Upgrade your Samsung
Procedure  Here
Odin Multidownloader v4.16 (Download)

• Samsung I7500 Galaxy

Odin Multidownloader v4.28 (Download)

• Samsung I5500 Galaxy 5, I5510, I5500 Corby
• Samsung Galaxy 550 & 551
• Samsung Galaxy Europa

Odin Multidownloader v4.38 (Download)

• Samsung Galaxy Mini S5570
• Samsung Galaxy Suit S5670
• Samsung Galaxy Ace S5830 & S5830i
• Samsung Galaxy Fit S5670

Odin Multidownloader v4.42 (Download)

• Samsung Galaxy Xcover S5690
• Samsung Galaxy Gio S5660
• Samsung Galaxy Y Pro B5510
• Samsung Galaxy Pro B7510
• Samsung Galaxy M Pro B7800,

Odin Multidownloader v4.43 (Download)

• Samsung Galaxy S Plus I9001
• Samsung Galaxy W I8150 & T679M (Bell)
• Samsung Exhibit II 4G T679 (T-Mobile)

Odin3 v1.83 (Download)

• Samsung Galaxy Tab P1000 & P1010 (Wi-Fi)
• Samsung Galaxy S I9000
• Samsung Galaxy SL I9003
• Samsung Galaxy Giorgio Armani I9010
• Samsung Google Nexus S I9020, I9023 & I9020A
• Samsung Galaxy S II I9000,

Odin3 v1.85 (Download)

• Samsung Galaxy S II I9100, I9100G, I9100P, SGH-I727 (AT&T), SGH-I777
• Samsung Galaxy Tab 10.1v P7100
• Samsung Galaxy Y S5360, S5363
• Samsung Galaxy S II LTE SGH-I727R
• SGH-T589 Gravity
• Samsung Infuse 4G SGH-I997
• Samsung Galaxy Tab 8.9 P7300
• Samsung Galaxy Tab10.1 P7500, P7510 (Wi-Fi)
• Samsung Galaxy Y Pro B5510
• Samsung Galaxy Note N7000
• Samsung DoubleTime SGH-i857
• Samsung Captivate Glide SGH-i927
• Samsung Galaxy S Glide SGH-i927R
• Samsung Galaxy Tab 8.9 LTE SGH-i957
• Samsung Gravity Smart SGH-T589
• Samsung Galaxy Q SGH-T589R
• Samsung Galaxy Tab 7.0 Plus SGH-T869
• SCH-R910 Indulge
• SGH-I897 Captivate
• Samsung Galaxy S Fascinate 4G SGH-T959P
• Samsung Hercules SGH-T989
• SCH-I500 Mesmerize
• SPH-M820 Prevail
• SPH-D700 Epic 4G
• SPH-M910 Intercept
• SCH-R880 Acclaim
• SGH-I997 Infuse
• SGH-T839 Sidekick
• SGH-T959 Vibrant
• SGH-T959v Galaxy S 4G
• SPH-D720 Nexus S 4G
• SPH-M580 Replenish
• SPH-M920 Transform
• SCH-I400 Contunuum
• SCH-I500 Fascinate,
• SCH-I510 Droid Charge,
• SGH-I917 Focus
• Samsung Dart SGH-T499

Odin v3.07 (Download) (Recommended)

• Supports all the latest devices as well as the devices which support any version of Odin3.

Odin v3.09 (Download) (New)

• Galaxy S4 Mini

So install Odin Multi Downloader according to your mobile and enjoy flashing firmware on your own.

How To Update Official Android 4.1.2 DXMD3 Jelly Bean Update for Samsung Galaxy Tab 7.7 GT-P6800 ROm Free Download

The concept of Android based tablet computers was very popular amongst the people and realizing it quite early Samsung launched their Galaxy Tab series. In this series there is wide variety of Tablets available depending upon screen sizes and other specifications. Galaxy Tab 7.7 was launched in month of February last year and it is thinnest Tab Samsung has made in 7 inch series. Plus it was the first Tab to support super AMOLED display resulting in very high pixel density.
Talking about software support, Tab was launched with Android 3.2 Honeycomb with Samsung’s custom overlay TouchWix UX which provided many widgets plus many features specially designed for Tabs. In July 2012 official Ice Cream Sandwich update was given. And now after wait of almost a year Tab 7.7 usears can taste the treat of Jelly Bean officially. The update is stuffed with all latest Jelly Bean features.
Currently update is available for few countries only. But people from other countries can definitely update their Tabs to latest Jelly Bean 4.1.2 by manual installation of the update. Also custom ROM users will have to perform the update manually even if it is available for their country.
Here is the simple procedure of how to update Galaxy Tab 7.7 to Android 4.1.2 manually.
Disclaimer:Update procedure given in the further article is considered as risky and can cause damage to tablet. We highly recommend that you should think once more before implementing it to the tab. First read the article completely and then follow all the steps at your own risk. We or developers could not be held responsible for any damage happened to your device during the procedure.

The article given below is strictly meant for Samsung Galaxy Tab 7.7 bearing model number P6800. Dont try to implement it on any other tab or variant else you will end up with some unwanted results.
Pre-requisites:

• charge the tablet at least up to 75%in order to avoid any interruption during installation process due to low battery power.

• It is recommended that you should take a take a backup of all important personal data like SMS, MMS, APN, contacts etc. to the external memory.

• You must have installed tablet drivers on computer. If you have installed kies on your computer you dont need to install separately. And if you don’t have Kies, you can download and install it from here.

Procedure to install Official Android 4.1.2 DXMD3 Firmware on Samsung Galaxy Tab7.7:

• Download firmware for your tablet from official download link given below.

1. Official Android 4.1.2 DXMD3 Jelly Bean Firmware for Samsung Galaxy Tab 7.7

• Also download Odin multi-downloader software and install it on computer. It is software of Samsung which is used for flashing firmware on tablet

1. Odin

• Now boot the device into downloading mode. This can be done by pressing & holding Volume down + Power buttonsimultaneously until you getDownloadingmessage on the screen.

• Open Odin Multi Downloader tool on your Computer & connect the Tab using USB cable.

• If your Tab is connected successfully, youll see that the ID:COM section (located at top left) is turned blue with a random COM port number appeared below it (If your ID:COM box doesnt turn into blue, don’t worry. Just install Samsung drivers by using the link mentioned in Pre-requisites).

• In Odin software, select PDA tab & choose the firmware file which you have extracted from downloaded zip file.

• Essential!!Don’t make any other changesin Odin software except for selecting the required file as given in above step. Keep all other options as they are. And do not check Re-partition box even by mistake.

• You are done, Now simply press Start button to begin the flashing process. It will not take more than 6-7 Minutes to finish with the flashing procedure.

• After installation procedure in Odin is over, ID:COM section will turn Green & will show Pass in the box above ID:COM section.

• Essential!!If Odin gets stuck at any step after you hit the start button and seems to be not responding or if you get FAIL message in Odin after completion of process this is what you have to do. Disconnect your device from computer and close the Odin. Remove the battery of your Tab and re-insert it. Then again go to downloading mode and repeat the procedure.

• Disconnect your Tab from PC.

• Procedure isn’t complete yet.Turn your device off again. Now you need to enter into Recovery mode. The same can be entered by HoldingVolume Up + Power simultaneously. UseVolume Up/Down keysto navigate options in recovery &Power buttonto select them.

• To avoid your device from going into bootloop, in the Recovery mode, selectwipe data/factory reset&wipe cache partition.

• After wiping data, select reboot system now to Restart the Tab. Usually first boot take some time after flashing firmware so be patient. As soon as device gets rebooted successfully , youll land in All new Home Screen.

Nice Job!! You have successfully updated your Samsung Galaxy Tab 7.7 to official Android 4.1.2 Jelly Bean. Now enjoy the latest features of Jelly Bean and fell free to contact us through comments if you have got any doubts with the article.

CKTEL ST23i MSTAR Dead Phone Recover By Volcano Box [Firmware Inside]

CKTEL ST23i MSTAR Dead Phone Recover By Volcano Box

CKTEL_ST23i_Mstar_Flash_File

Huawei S7 Tablet Model S7-104 IDEOS LOGO Only Done 100% tested wat see and try step by step

Huawei S7 Tablet Model S7-104 IDEOS LOGO Only Done 100% tested wat see and try step by step

Huawei S7 Tablet Model S7-104 ( IDEOS LOGO Only ) Done



Status



I use this two file but i'm not lucky (
S7 V100R001C08B016(U.K. Dataselect)

S7 V100R001C70B112(Russia Channel)

Procedure

1) Download this tested file for Huawei S7 Tablet Model S7-104

2) Format your SD card in FAT32(NO NEED TO FORMATE IF ITS ALREADY FAT32)

3) create a folder "dload" off course without the quotes on to the root of your SD card.

4) Extract the UPDATE.APP from the stock ROM and place it in "dload"

5) Power off your phone with sd card inside.

6) Power on by pressing POWER+VOLUME UP+VOLUME DOWN Button if done properly you will see progress bar saying UPDATING! after its done it will reboot automatically

Screen Photos

Allwinner CPU Flash Tools here Free Download

Allwinner CPU Flash Tools here
Many Devices (especially Tablets) have Allwinner CPU inside

Allwinner CPU Android Flashers
(LiveSuit Pack) -

Link-1 (v 1.05)

Link-2 (v 1.07)

Link-3 (v 1.09)

Link-4 (v 1.11)

Link-5 (v 1.11)

NOTE : Flash Usb Driver is inside these packs. After Installing you'll find it.

All China Factory Flashers Here

Spreadtrum Android Flashers
(ResearchDownload) -

Link-1 (v 2.9.7017)

Link-2 (v 2.9.7007)

Link-3 (v 2.9.7006)

Link-4 (v 2.9.7003)

=======================================

Mtk Android Flashers
(SP Flash Tool) -

Link-1 (v 3.1312.0.139)

Link-2 (v 3.1304.0.119)

Link-3 (v 3.1244.0.sn85)

Link-4 (v 3.1224.01)